武汉欧亚泰克机电设备有限公司
专业进口，有询价请或者
曹

/ +86 27 84899919 ext 820
传真/ +86 27 84796721

1.欧美*，*，可提供海关报关单及原厂证明
2.德国公司源头采购，享受本土低价，切实节省采购成本
3.携手优秀物流服务商，确?；跗谧既泛徒档突跷锖乃?br />4.严格执行国家保修规定，与供应商合作确保货物质量
5.专业服务，值得信赖，高素质员工，ERP全流程操作，精细化管理
6.快速报价，合作有礼，保证zui快速的报价速度，VIP体验

FC7系列火焰探测器(Brahma)

 详细介绍

FC11系列火焰探测器(Brahma)

 详细介绍

• FC7系列火焰探测器 品牌：Brahma（布拉玛） 产地：意大利

  产品介绍

  火焰探测器起感光作用。连接至燃烧器的控制器，感知燃烧器火焰是否正常。 不同型号的燃烧器控制器必须配合合适型号的火焰探测器使用。

  技术参数

  FC7/R 1.5...5.5 LUX FC7/A 1.5...3.0 LUX FC7/V 3.0...5.5 LUX 直径 17.5mm FC8系列火焰探测器(Brahma)  详细介绍   FC8系列火焰探测器 品牌：Brahma（布拉玛） 产地：意大利  产品介绍 火焰探测器起感光作用。连接至燃烧器的控制器，感知燃烧器火焰是否正常。 *FC7系列火焰探测器(Brahma)（布拉玛）不同型号的燃烧器控制器必须配合合适型号的火焰探测器使用。  技术参数 FC8/R 1.5...5.5 LUX FC8/A 1.5...3.0 LUX FC8/V 3.0...5.5 LUX 直径 17.5mm FC13系列火焰探测器(Brahma)  详细介绍   FC13系列火焰探测器 品牌：Brahma（布拉玛） 产地：意大利  产品介绍 火焰探测器起感光作用。连接至燃烧器的控制器，感知燃烧器火焰是否正常。 不同型号的燃烧器控制器必须配合合适型号的火焰探测器使用。 橡胶套桶  技术参数 FC13/R 1.5...6.5 LUX FC13/A 1.5...3.0 LUX FC13/V 3.0...6.5 LUX 管体直径 8.5mm 安装直径 14.2mm   FD1系列火焰探测器(Brahma)  详细介绍   FD1系列火焰探测器 品牌：Brahma（布拉玛）*FC7系列火焰探测器(Brahma)（布拉玛） 产地：意大利  产品介绍 The combustion process, depending on the type of fuel used, emits more or less light radiation belonging to the ultraviolet, visible or infrared spectrum. Of course, gas oil combustion generates a very bright flame, which is easily detectable by means of sensors using common photocells; nevertheless, at the same time gas oil combustion generates a quantity of substances not compley burnt (unburnt substances), which pollute and also dirty the combustion chamber step by step. By suitably adjusting the combustion, it is possible to solve this problem and improve the flame quality, making it similar to the flame produced by gas, natural gas or propane combustion (blue flame). Since photocells are not sensitive to blue flame light, in most gas burners the presence of flame is detected by exploiting the ionization principle; to this purpose, you simply need an electrode (electrically isolated metal rod) suitably "immersed" in the flame. This principle is not easily applicable in oil burners, as the electrode immersed in the flame gets dirty quickly (consequently losing its efficiency) and modifies the turbulence in the combustion chamber, thus creating serious problems. For all these reasons, it is necessary to detect the presence of flame by means of ultraviolet sensitive detectors.*FC7系列火焰探测器(Brahma)（布拉玛） The FDx sensor uses a silicon preamplified active element, specifically designed for blue flame burner applications; the UV light peak detection of this sensor is around 310 nm. Thanks to the incorporation of suitable electronic components, this device can be fitted to the BRAHMA control boxes of the EUROBOX, EUROFLAT, MINIFLAT, MICROFLAT and EUROGAS series (suitable for gas burner applications); moreover, this sensor is particularly well fitted for the control boxes type GR1, GR1/Z and GR2 of the EUROOIL series and for any control boxes of the OIL-SYSTEM series (suitable for oil burner applications). In order to meet the widest range of market requirements, this device is available in the FD1 version (with front view) and in the FD2 version (with lateral view). Please note that the FDx detector is sensitive to the ultraviolet component of visible light; therefore, its use is recommended in burners fitted with closed combustion chambers and in an application environment perfectly shielded from visible light.  技术参数 主电压 220-240V / 50...60Hz 功率 1V 可见光波长 290...350nm 可见光角度 8º zui大输出电流 500uA 工作温度 -20ºC...+60ºC 环境湿度 95% UV1系列火焰探测器(Brahma)  详细介绍   UV1系列火焰探测器 品牌：Brahma（布拉玛） 产地：意大利  产品介绍 The users’ different requirements regarding flame detection for gas systems, can be met by using the following probes of our production: UV1 standard phototube (Fig.2); UV1/A selected phototube; UV1/H high sensitivity phototube: Case: nylon*FC7系列火焰探测器(Brahma)（布拉玛） Case diameter: mm 22 Case length: mm 85 Cable length: mm 600 (standard)

•