奥林巴斯GLIDER（滑动）扫查器

手动x - y扫描仪

滑翔机X-Y扫描仪是一个2轴编码扫描仪，用于手动检查轻微弯曲或平坦的复合表面。该扫描仪非常适合光栅扫描与以下技术:

常规超声学(UT)

相控阵超声(PAUT)

涡流(EC)

涡流阵列(ECA)

常用的检查材料包括复合材料和铝，使用吸盘式分离盒;和碳钢，使用可选的磁性吊舱。

Manual X-Y Scanner

The GLIDER X-Y Scanner is a 2-axis encoding scanner for the manual inspection of slightly curved or flat composite surfaces. The scanner is well suited for raster scanning with the following technologies:

• Conventional ultrasonics (UT)
• Phased array ultrasonics (PAUT)
• Eddy current (EC)
• Eddy current array (ECA)

Commonly inspected materials include composites and aluminum, using suction-cup pods; and carbon steel, using optional magnetic pods.

Design Characteristics

奥林巴斯GLIDER（滑动）扫查器

设计特点

x轴连接到两个安装吊舱。根据检验材料的不同，可以使用以下一种型号:

吸盘安装吊舱(含)

磁性安装吊舱(选配)

有两个编码器?？?每个轴上一个)来测量探头的位置。这些?？榈奈灰瓶梢栽?.27毫米的步骤，自由运行，或锁定。

扫描仪有三种格式(18 。,24 。和36 。),根据所需的扫描范围:

滑翔机18 x 18

滑翔机24乘24

滑翔机36 x 36

The X-axis is attached to two mounting pods. Depending on the material to inspect, one of the following models can be used:

• Suction-cup mounting pod (included)
• Magnetic mounting pod (optional)

There are two encoder modules (one on each axis) to measure the probe position. The displacement of these modules can be in 3.27 mm steps, free running, or locked.

The scanner comes in three formats (18?in., 24?in., and 36?in.), depending on the scan coverage needed:

• GLIDER 18 x 18
• GLIDER 24 x 24
• GLIDER 36 x 36

滑翔机扫描套件包括:

两个跟踪期望的中风(18 。,24 。或36 。，视乎型号而定)

两个displacement-encoding?？?/p>

两个吸盘安装吊舱

5米编码器电缆兼容OmniScan仪器

相控阵轭架(40毫米)

TOFD/PE轭架(31.75 mm)

90°探头支架安装支架

180°探头支架安装支架

带有弹簧的探头支架

灌溉管件

艰难的手提箱

GLIDER Scanner Kit Includes:

• Two tracks for desired stroke (18?in., 24?in., or 36?in., depending on the model)
• Two displacement-encoding modules
• Two suction-cup mounting pods
• 5 m encoder cable compatible with OmniScan instruments
• Phased array yoke (40 mm)
• TOFD/PE yoke (31.75 mm)
• 90° probe holder mounting bracket
• 180° probe holder mounting bracket
• Probe holder bearing arm with springs
• Irrigation tubing and fitting
• Hard carrying case

Options

Magnetic Mounting Pods
Magnetic mounting pods enable use on ferromagnetic surfaces (part number GLIDER-A-01)
Tracks
18?in., 24?in., or 36?in. tracks are available as options.
Manual Water Pump Kit
Water pump is compatible with scanner umbilical cables. It can also be used with provided tubing. Includes tank, tubing, and Y-splitters (part number OPIX105).
Electric Water Pump Kits
The CFU-03 and CFU-05 are portable electric pump units used to supply couplant to wedges during ultrasonic inspections.