INDENTATION (STIFFNESS)

An indentation test is a very convenient way to measure the mechanical properties of a sample non-destructively. Unlike the unconfined compression test, where a sample needs to be harvested from the surface, indentation maintains the mechanical environment of the sample at the location of interest and its interaction with the surrounding material. This allows the test to be repeated. In this test configuration, a spherical indenter is pressed against the sample perpendicularly to its surface while the applied displacement and resulting load are recorded. Using a theoretical model, it is possible to calculate material stiffness from the stress-strain curve.

壓痕（剛度）

壓痕試驗是一種非常方便的方法來非破壞性地測量樣品的機械性能。與需要從表面收獲樣品的無側限壓縮測試不同，壓痕將樣品的機械環境保持在感興趣的位置及其與周?chē)牧系南嗷プ饔?。這允許重復測試。在該測試配置中，球形壓頭垂直于其表面壓在樣品上，同時記錄施加的位移和產生的載荷。使用理論模型，可以從應力-應變曲線計算材料剛度。

應用范圍：  宏觀力學/ 微觀力學/ 

材料力學/ 生物力學/

組織力學/ 細胞力學

動態力學/ 靜態力學/

楊氏模量/ 彈性模量/ 剪切模量/ 體積模量/ 耗能模量/聚集模量/ 洛氏硬度/ 維氏硬度/ 泊松比/滲透性（k）/

測試材料范圍：

可測試硬骨骼到超軟凝膠、腦組織、泡沫，大到整只動小到超細

纖維絲的跨度大樣品，0.1μm位移高分辨率、0.25μN力高分辨率，行程達250mm，力達250N，動靜態多模態測試分析、實時視頻記錄反饋測試，極限滿足各種材料多種力學性能的測量表征及評估。