英文介绍：
DC – 100 MHz, Current Probe Amplifier （TCPA300） uses:
DC – 100 MHz, 30 A DC （TCP312）
DC – 50 MHz, 50 A DC （TCP305）
DC – 15 MHz, 150 A DC （TCP303）
DC – 50 MHz, Current Probe Amplifier （TCPA400） Uses:
DC – 2 MHz, 750*1 A DC （TCP404XL） （500 A DC Continuous）
Automatic Scaling and Units*2 – Oscilloscope On-screen Readout of Magnitude and Amps reduces Measurement Errors with No More Hand Calculations
AC/DC Input Coupling
Low Insertion Impedance reduces Device Under Test Loading
Split-core Construction allows Easy Circuit Connection
Status Indicators provide Visual Operating Status and Notification of Potential Error Conditions – Degauss, Probe Open, Overload, Not Terminated into 50 ?, Noncompatible Probe Type
Lower DC Drift and Noise allows Improved Low-level Current Measurements
Certified for use in U.S., Canada, and Europe. Complies with applicable IEC Standards.
Applications
Development and Analysis Solutions for Designers, Installers, and Service Personnel in ecomm, Data Comm, Computer, and Semiconductor Power Electronics Environments for:
Power Supplies （Switching and Linear）
Semiconductor Devices （SCRs, IGBTs, MOSFETs, CMOS, BJTs）
Power Inverters/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Communications （Phone, Salite, Relay Stations）
Motor Drives
Transportation Systems （Electronic Vehicles, Electric Trains, Locomotives, Avionics）
Increased Performance and Simplicity
The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect （w/ TCA-BNC）, or TekVPI （w/ TPA-BNC） interfaces, current measurements and calculations are simple and easy.
*1 Derated with duty cycle.
*2 Requires a TDS TEKPROBE oscilloscope or a TekConnect oscilloscope with TCA-BNC.
Meets Today's AC/DC Current Measurement Applications
The TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and 150 A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.
Higher frequency performance is available with the TCP312 w/TCPA300 providing ≥100 MHz bandwidth and a maximum current of 30 A DC.
Measurement Errors and Manual Calculations are Now a Thing of the Past
With this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS500, TDS600, TDS700, TDS5000, TDS6000, and TDS7000B Series oscilloscope systems （the DPO3000, DPO4000, and DPO7000 Series oscilloscopes, the TPA-BNC adapter is required）.
The TCP300/TCP400 current measurement systems seamlessly integrate with your TDS Series oscilloscope.