盘马金刚石磨片、砂带、磨片被广泛用于打磨抛光陶瓷材料、硬质合金和复合材料。去除粗糙表面，改善粗糙度。

    Panma diamond grinding, abrasive, grinding is widely used for polishing ceramic material, hard alloy and composite materials. Removal of rough surface, improve the roughness.

    磨片直径从25mm到75mm不等，可装配在手动角磨机及自动机器人手臂上使用。粗号60目可以用于粗磨，然后使用相对细的目数比如200、320、400号作进一步的表面处理，通常320号被广泛应用并取得行业较高的表面效果。

    The disc diameter ranging from 25mm to 75mm, can be used in the assembly manual and automatic robot arm angle grinder. Rough, 60 mesh can be used for rough grinding, and then use the relatively fine mesh such as 200, 320, 400, for further surface treatment, usually No. 320 is widely used and industries have a higher surface effect is achieved.

    磨片较好的柔性，可以被应用在曲面的打磨及抛光。

    Grinding good flexibility can be used in grinding and polishing surfaces.