電壓擊穿試驗儀原理文獻

閱讀：1868發布時間：2015-12-22

電壓擊穿試驗儀

本文有北京北廣精儀儀器設備有限公司技術部提供禁止抄錄

標簽：電壓擊穿試驗儀介電擊穿強度試驗儀耐電壓強度擊穿試驗儀電氣強度試驗機

電壓擊穿試驗儀其工作原理過程以下詳解：

采集工頻220V電壓輸入給調壓器然后調壓器根據采集電壓慢慢調節輸出給小型變壓器輸入端采集調壓器輸出端電壓通過一定的比例變出高壓電壓輸出給高壓頭加壓到式樣表面通過不斷加壓達到擊穿的目的擊穿后上位機軟件會記錄當前數值高壓電壓會導通式樣下方的電極（負極）流經大地（所以在做實驗中接地線非常重要）完整的試驗環節就做完了。

做完式樣應該斷電然后打開屏蔽門手持放電棒進行放電（放電棒與高壓頭接觸兩秒左右）然后開門更換式樣。

電壓擊穿試驗儀主要用在絕緣的絕緣強度測試中！其工作原理在于自動高壓升值z(mì)ui后達到擊穿的目的（如有閃絡現象另當別論）然后記錄擊穿電壓值通過計算厚度得出擊穿強度值（此處軟件可以自動求值）

電壓擊穿試驗儀根據標準有以下幾種zui為常見：

GB14082006 GB T16952005 GB/T3333 HG/T3330 /GB12656 /ASTM D149 .

電壓擊穿試驗儀對應名稱如下：

絕緣材料電氣強度試驗 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗 電纜紙工頻電壓擊穿試驗 絕緣漆漆膜擊穿強度測定電容器紙工頻電壓擊穿試驗 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度試驗

電壓擊穿試驗儀技術指標：

01、輸入電壓：交流 220 V

02、輸出電壓：交流 0--100 KV ;

直流 0—100 KV

Voltage breakdown tester
This is Beijing this precision instrument equipment Co. Ltd. TechnologiesProviding prohibit copying
Tags: voltage breakdown tester dielectric breakdown strength tester resistance to voltage strength breakdown tester electrical strength test machine
Voltage breakdown testing instrument and its working principle the following detailed process:
To adjust the voltage regulator and voltage regulator voltage acquisition slowly adjust output to small input transformer acquisition terminal voltage regulator output voltage of a high voltage output to the high head pressure to surface patterns through continuous pressure to wear to breakdown strike after PC software will record the numerical value of the current high voltage conduction pattern beneath the electrode (anode) flows through the land (so in doing the experiment in grounding is very important) finish on the complete test link through a certain proportion according to the acquisition 220V 50Hz voltage signals fed a.
Finish the style should be power off and then open the door with a hand-held discharge rod discharge (discharge rod and high pressure head contact for two seconds) and then open the door to change the style.
Voltage breakdown tester is mainly used in the insulation strength test! Its working principle is finally reaches the breakdown voltage automatic appreciation purposes (such as a flashover phenomenon is a different matter) then records the breakdown voltage value by calculating the thickness to attack wear intensity values (where software can be automatically evaluated)
Voltage breakdown tester according to the following standards are the most common:
GB T16952005 GB/T3333 HG/T3330 /GB12656 /ASTM D149 GB14082006.
The corresponding name of the voltage breakdown tester is as follows:
Dielectric strength test of electrical strength of insulating materials - Test of power frequency voltage breakdown strength and resistance to voltage strength test cable paper power frequency voltage breakdown test of insulation paint film breakdown strength test of power frequency voltage breakdown test of dielectric breakdown of solid dielectric materials under industrial power frequency
Voltage breakdown tester technical indicators:
01, input voltage: AC 220 V
02, output voltage: AC KV 0--100;
DC 0 - 100 KV

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。

在線留言