亚洲精品综合日韩中文字幕网站_精品综合久久久久97_中文在线天堂网www_久久精品免费一区二区三区_91久久国产综合精品女同国语_久久资源总站在线国产成人

      西安瑞禧生物科技有限公司

      實驗指南-SMPH交聯劑(制備抗體)

      時間:2018-4-24閱讀:1549

      實驗指南-SMPH交聯劑(制備抗體)

       

       

      SMPH是一種具有N-羥基琥珀酰亞胺(NHS)酯和馬來酰亞胺基團,允許胺和巰基分子的共價結合的異功能交聯劑。NHS酯與伯胺在PH7- 9反應生成酰胺鍵,而馬來酰亞胺在pH6.5-7.5處與巰基反應形成穩定的硫醚鍵。在水溶液中,水解NHS酯是一種競爭反應,其反應速率隨pH的增加而增加。馬來酰亞胺基團比NHS酯基穩定,但在pH值大于7.5時,對巰基的水解反應也會失去特異性。由于這些原因,涉及這型的共軛實驗,異官能團交聯劑通常在pH 7.2-7.5下進行,NHS酯(胺靶向)反應是在馬來酰亞胺(巰基靶)反應之前或同時完成的。

       

      產品名稱

      SMPH

      英文名稱

      succinimidyl-6-((b-maleimidopropionamido)hexanoate

      單體

      N-羥基琥珀酰亞胺,馬來酰亞胺基團

      分子式

      C17H21N3O7

      分子量

      379.4

      溶解度

      DMSO or DMF 

      純度

      98%

      保存

      -20℃

       

       

      結構式

       

       

      SMPH可用于在兩步反應方案中制備抗體和半抗原載體蛋白綴合物。先,含胺的蛋白質與交聯劑的幾倍摩爾過量反應,然后通過透析除去過量的(未反應的)試劑;后,加入巰基分子以與已經附著于*親合物的馬來酰亞胺基團反應。

       

      SMPH交聯劑對水分。在溫度下在干燥劑中儲存試劑瓶。在打開前平衡小瓶室溫,以避免容器內的濕氣凝結。溶解所需量的試劑,并在水解發生前立即使用。丟棄未使用的重組試劑。

       

      避免在共軛過程中含有初級胺(例如TrI或甘氨酸)和巰基的緩沖液,因為它們會與預期的反應競爭。如果需要,將樣品透析成適當?shù)木彌_液,如磷酸鹽緩沖鹽水(PBS)。

       

      Molecules to be reacted with the maleimide moiety must have free (reduced) sulfhydryls. Reduce peptide disulfide bonds with Thermo Scientific Immobilized TCEP Disulfide Reducing Gel (Product No. 77712). Reduce disulfide bonds in high molecular weight proteins using 5mM TCEP (1:100 dilution of Thermo Scientific Bond-Breaker TCEP Solution, Product No. 77720) for 30 minutes at room temperature, followed by two passes through an appropriate desalting column (e.g., Thermo Scientific Zeba Spin Desalting Columns). Be aware that proteins (e.g., antibodies) may be inactivated by complete reduction of disulfide bonds they contain. Selective reduction of hinge-region disulfide bonds in IgG may be accomplished with 2-Mercaptoethylamine•HCl (2-MEA, Product No. 20408). Sulfhydryls may be added to molecules using N-succinimidyl S-acetylthioacetate (SATA, Product No. 26102) or 2-iminothiolane•HCl (Traut’s Reagent, Product No. 26101), which modify primary amines.

       

      Procedure for Two-step Protein Crosslinking

      兩步蛋白質交聯工藝

      Generally, a 10- to 50-fold molar excess of crosslinker over the amount of amine-containing protein results in sufficient maleimide activation to enable several sulfhydryl-containing proteins to be conjugated to each amine-containing protein.

       

      More dilute protein solutions require greater fold molar excess of reagent to achieve the same level of activation. Empirical testing is necessary to determine activation levels and final conjugation ratios that are optimal for the intended application.

       

       

      A. Material Preparation準備材料

      Conjugation Buffer: Phosphate buffered saline (PBS, pH 7.2; e.g., Product No. 28372) or other amine- and sulfhydrylfree buffer at pH 6.5-7.5 (see Important Product Information) – adding EDTA to 1-5mM helps to chelate divalent metals,

      thereby preventing disulfide formation in the sulfhydryl-containing protein

      • Desalting column to separate modified protein from excess cross-linker and reaction byproducts (e.g., Zeba™ Spin Desalting Columns)

      • Amine-containing protein (Protein-NH2) and sulfhydryl-containing protein (Protein-SH) to be conjugated

       

      B.Conjugation過程:

      Note: For best results, ensure that Protein-SH is prepared (see Important Product Information) and ready to combine with Protein-NH2 in step 5.

       

      1. Dissolve Protein-NH2 in Conjugation Buffer at 0.1mM (e.g., 5mg in 1mL for a 50kDa protein).

      2. Add crosslinker to dissolved Protein-NH2 at 1mM final (= 10-fold molar excess) by dissolving 3.80mg SMPH in 1mL DMSO (makes 10mM) and then adding 100µL/mL of Protein-NH2 solution.

      3. Incubate reaction mixture for 30 minutes at room temperature or 2 hours at 4°C.

      4. Remove excess crosslinker using a desalting column equilibrated with Conjugation Buffer.

      Note: Follow the desalting column product instructions to determine which fractions contain Protein-NH2. Alternatively, locate the protein by measuring for fractions having peak absorbance at 280nm; however, be aware that the NHS-ester leaving group also absorbs strongly at 280nm.

      5. Combine and mix Protein-SH and desalted Protein-NH2 in a molar ratio corresponding to that desired for the final conjugate and consistent with the relative number of sulfhydryl and activated amines that exist on the two proteins.

      6. Incubate the reaction mixture at room temperature for 30 minutes or 2 hours at 4°C.

      Note: Generally, there is no harm in allowing the reaction to proceed for several hours or overnight, although usually the reaction will be complete in the specified time. To stop the conjugation reaction before completion, add buffer containing reduced cysteine at a concentration several times greater than the sulfhydryls of Protein-SH.

      Note: Conjugation efficiency may be estimated by electrophoresis separation and subsequent protein staining.

       

       

       

      西安瑞禧生物科技有限公司有自己的獨立有機實驗室,可以自主功能化蛋白交聯劑,我們可以同功能蛋白交聯劑,異功能蛋白交聯劑,交聯劑及其他相關小分子交聯劑產品,我公司的產品純化達98%+以上并可以提供液相圖譜來佐證純度,并且提供相關技術指導服務。

       

      產品列表

      Purified Enzymes純化的:

      Pepsin       CAS Number: 9001-75-6

      Chymotrypsin CAS Number: 9004-07-3

      Trypsin      CAS Number: 9002-07-7

      Streptavidin CAS Number: 9013-20-1

      Horseradish Peroxidase (HRP)   CAS Number: 9003-99-0

      Alkaline Phosphatase 35K Units CAS Number: 9001-78-9

      Purified Polysorbate 20

      Purified Polysorbate 80

      Purified Nonidet P-40

      Purified Triton X-100

      Purified Triton X-114

      TCEP-HCl Reducing Agent   CAS Number: 51805-45-9

      DTT    CAS Number: 3483-12-3

      pNPP   CAS Number: 4264-83-9

      Sodium meta-Periodate  CAS Number: 7790-28-5

      Succinylacetone        CAS Number: 51568-18-4

      Dimethyl sulfoxide     CAS Number: 67-68-5

      Dimethylformamide      CAS Number: 68-12-2

      MES Monohydrate        CAS Number: 145224-94-8

      Sodium Borate Buffer   CAS Number: 1303-96-4

      BS CAS #: 58626-38-3

      PDPH

      SBA CAS #: 42014-51-7

      SIA CAS #: 39028-27-8

      SMCC CAS #: 64987-85-5

      SMPB CAS #: 79886-55-8

      SMPH

      SPDP CAS #: 68181-17-9

      Sulfo-LC-SPDP

      Sulfo-MBS

      Sulfo-SANPAH CAS #: 102568-43-4

      Sulfo-SMCC CAS #: 92921-24-9

      BS2G-d4

      BS3-d4

      DSG-d4

      DSS-d4

      DSP-d8

      Biotin Hydrazide CAS #: 66640-86-6

      NHS-Biotin CAS #: 35013-72-0

      NHS-SS-Biotin CAS #: 142439-92-7

      Sulfo-NHS-Biotin CAS #: 119616-92-5

      Sulfo-NHS-LC-Biotin CAS #: 128062-22-0

      Sulfo-NHS-SS-Biotin CAS #: 202057-28-1

      HPG CAS #: 24645-80-5

      SATA CAS #: 76931-93-6

      Sulfo-NHS Acetate CAS #: 152305-87-8

      Sulfo-NHS   CAS #: 106627-54-7

      BS3 CAS #: 82436-77-9

      BS2G

      BSG CAS #: 79642-50-5

      DSP CAS #: 57757-57-0

      DSS CAS #: 68528-80-3

      DTSSP CAS #: 81069-02-5

      EGS CAS #: 70539-42-3

      Sulfo-EGS

      DSSeb CAS # 23024-29-5

      BMPS CAS #: 55750-62-4

      EMCS CAS #: 55750-63-5

      GMBS CAS #: 80307-12-6

      LC-SPDP

       

      以上資料源于西安瑞禧生物科技有限公司

      如有其他信息或產品信息咨詢請致電我們

      西安瑞禧生物科技有限公司

      Xi'an ruixi Biological Technology Co;Ltd

       

       

      會員登錄

      X

      請輸入賬號

      請輸入密碼

      =

      請輸驗證碼

      收藏該商鋪

      X
      該信息已收藏!
      標簽:
      保存成功

      (空格分隔,最多3個,單個標簽最多10個字符)

      常用:

      提示

      X
      您的留言已提交成功!我們將在第一時間回復您~

      以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。

      溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

      撥打電話
      在線留言
      文安县| 凤山市| 中江县| 肇州县| 安庆市| 灵山县| 玉环县| 苗栗县| 波密县| 保山市| 宽甸| 象州县| 吴堡县| 乐平市| 洱源县| 陆良县| 朝阳区| 台北县| 右玉县| 石泉县| 大连市| 龙井市| 谷城县| 汾阳市| 共和县| 河西区| 三河市| 阿拉善左旗| 道孚县| 临夏市| 易门县| 信阳市| 麻阳| 湖州市| 余干县| 清原| 宣武区| 花莲市| 寻甸| 阳高县| 大港区|