GM 4465P

本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需GM 4465P標準詳細信息或GM 4465P具體測試方法，請與我們技術人員聯系或給我們留言，我們將為您提供相關的技術支持。

 

GM 4465P英文簡介

Can be used to test coated specimens by exposing them to water fog at an elevated temperature, using apparatus similar to that used for salt spray testing to ASTM B117.

Test specimens are placed in an enclosed chamber that meets the apparatus requirements of ASTM B117. Here they are exposed to a continuous indirect spray water, which falls-out on to the specimens at a rate of 1.0 to 2.0ml/80cm²/hour, in a chamber temperature of +38C and a humidity of 100%RH. This climate is maintained under constant steady state conditions. The test duration is variable.

kingjo-FOG鹽霧試驗箱用于GM 4465P鹽霧腐蝕測試的流程

kingjo-FOG鹽霧試驗箱用于GM 4465P鹽霧腐蝕測試的流程