員.png)
QQ交談
您所在位置：請輸入產品關鍵字：
郵編：200001
聯系人：程東旭
電話：
傳真：
手機：19121166298
留言：發送留言
個性化：www.dlshyz.com
網址：
商鋪：http://www.cylcaiwu.com/st152775/
e+h渦街流量計Proline R 200
點擊次數：771 發布時間：2017-6-19
e+h渦街流量計Proline Prowirl R 200
一級縮徑后測量精度不變，提供一體式和分體式結構
縮徑型流量計Prowirl R 內置一級或二級縮徑，可以有效的測量小流量。Prowirl R真實的滿足行業標準的兩線制技術，無縫集成到現有的基礎設施和控制系統。由于本質安全設計和熟練的安裝，即使在危險區域也能有高度的操作安全。
優勢
內置溫度測量，用于飽和蒸汽質量和能量流的測量。
經濟、省時：一級縮徑無需改裝管道
高可用性：穩定性好，抗震性強，抗溫度沖擊和水錘沖擊
免維護：生命周期標定
儀表接線方便，獨立接線腔
操作安全：顯示模塊帶觸摸鍵，背光顯示，無需打開儀表操作
內置驗證技術：心跳技術
應用領域
測量濕/飽和/過熱蒸汽，可測量氣體和液體（包括低溫液體）。 用于低流量或漸小流量的應用測量。
設備參數
集成直徑減小為1或2行
公稱直徑（交配管）可達DN 250 (10")
根據行業標準，定制安裝長度
顯示模塊帶數據傳輸功能
堅固耐用的雙腔室外殼
工廠安全：通過多項認證（SIL，危險區域）
測量原理渦街主要特點The flowmeter with the same accuracy despite line size reduction, available as compact or remote version. Integrated temperature measurement for mass/energy flow of saturated steam. Dedicated for applications with very low or reduced flow.
特點Cost and time saving – no pipework modifications needed for line size reduction. High availability – proven robustness, resistance to vibrations, temperature shocks & water hammer. No maintenance – lifetime calibration. Integrated diameter reduction by 1 or 2 line sizes. Nominal diameter (mating pipe) up to DN 250 (10").
Transmitter featuresConvenient device wiring – separate connection compartment. Safe operation – no need to open the device due to display with touch control, background lighting. Integrated verification – Heartbeat Technology. Display module with data transfer function. Robust two‐chamber housing.
直徑DN 25 to 250 (1 to 10")
Wetted materialsMeasuring tube: 1.4408 (CF3M)
DSC sensor: 1.4435 (316/316L)
Connection: 1.4404 (F316/F316L)
Measured variablesVolume flow, mass flow, corrected volume flow, energy flow, heat flow difference, temperature
測量誤差Volume flow (liquid): ±0.75 %
Volume flow (steam, gas): ±1.00 %
Mass flow (liquid): ±0.85%
Mass flow (steam, gas): ±1.7 %
量程Liquid: 0.26 to 545 m³/h (0.15 to 321 ft³/min)
depending on medium: water with 1 bar a, 20 °C (14.5 psi a, 68° F)
Steam, gas: 3.6 to 7262 m³/h (2.12 to 4274 ft³/min
depending on medium: steam with 180 °C, 10 bar a (356 °F, 145 psi a); air with 25 °C, 4.4 bar a (77 °F, 63.8 psi a)
壓力范圍PN 40, Class 300, 20K
過程溫度Standard: –40 to +260 °C (–40 to +500 °F)
High/low temperature (option): –200 to +400 °C (–328 to +752 °F)
High/low temperature (on request): –200 to +450 °C (–328 to +842 °F)
環境溫度Compact version (standard): –40 to +80 °C (–40 to +176 °F)
Compact version (option): –50 to +80 °C (–58 to +176 °F)
Remote version (standard): –40 to +85 °C (–40 to +185 °F)
Remote version (option): –50 to +85 °C (–58 to +185 °F)
Sensor housing materialSensor connection housing: AlSi10Mg, coated; 1.4408 (CF3M)
Transmitter housing materialAlSi10Mg, coated; 1.4404 (316L)
電子插件的防護Compact version: IP66/67, type 4X enclosure
Sensor remote version: IP66/67, type 4X enclosure
Transmitter remote version: IP66/67, type 4X enclosure
顯示/操作4‐line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available
輸出4‐20 mA HART (passive)
4‐20 mA (passive)
Pulse/frequency/switch output (passive)
輸入4‐20 mA (passive)
通信HART, PROFIBUS PA, FOUNDATION Fieldbus
Power supplyDC 12 to 35 V (4‐20 mA HART with/without pulse/frequency/switch output)
DC 12 to 30 V (4‐20 mA HART, 4‐20 mA)
DC 12 to 35 V (4‐20 mA HART, pulse/frequency/switch output, 4‐20 mA input)
DC 9 to 32 V (PROFIBUS PA, pulse/frequency/switch output)
防爆認證ATEX, IECEx, cCSAus, TIIS
Other approvals and certificates
Functional safetyFunctional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Metrological approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Pressure approvals and certificatesPED, CRN, AD 2000
Material certificates3.1 material
NACE MR0175/MR0103, PMI (on request); welding test acc. to ISO 15614‐1, similar to ASME IX (on request)