免费看无码一级A片在线播放_国产精品人人做人人爽人人添_亚洲AⅤ无码一区二区波多野按摩_在线观看91精品国产网站


可与华仪电子的安规测试器连结；组成安规六合一（ACW/DCW/IR/GB/RUN/LLT）测试系统
	超大型 320 x 240 Graphic LCD ，可同时显示量测电压/接触电流及测试时间

	量测频宽 DC - 1MHz *符合 IEC60990 接触电流测试规范

	可量测zui大峰值 75mApeak / 有效值 35mArms，满足安规机构测试验证需求（选配）

	内建 7 组人体模拟阻抗（MD）且可扩充一组，一台仪器就可以满足多种安规标准要求

	MD具有BNC量测端子，可外接示波器或电压表读取MD电压值，方便对MD进行校准

	人体模拟阻抗（MD）的校准方式，可以*符合IEC60990标准规定进行

	可灵活选择MD漏电流量测点（如: IEC60065 U1&U2）；符合安规标准要求

	负载zui大容量为 10KVA / 40Arms，允许启动瞬间承受 250Apeak 不切断?；?/td>

	可选配产品电气性能量测模块（RUN Test Module），可量测功率/电压/电流/功率因子

	可选配多功能界面卡内含USB-A数据收集功能，内部记忆可储存至少10万笔的测试结果

INPUT
Voltage		115/230 VAC ± 15%
Frequency		50/60 Hz ± 5%
Fuse		2A Slow-Blo 250V AC
Line condition
Power Switch		Reverse polarity switch for normal condition （on / off / auto setting）
Neutral Switch		Neutral switch on/off selection for single fault condition
Ground Switch		Ground switch on/off selection for class I single fault condition
Probe Setting
Surface to Surface （PH- PL）
Surface to Line（PH - L）
Ground to Line （G - L）
Ground to Neutral （G - N）
Auto Function （G - N & G - L）
SETTING
Touch Current High Limit （RMS）	Range:	0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA
	Resolution:	0.1uA/1uA/0.01mA
Touch Current Low Limit （RMS）	Range:	0.0-999.9 uA
	Resolution:	0.1uA
Touch Current High Limit （Peak）	Range:	0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA
	Resolution:	0.1uA/1uA/0.1mA
Touch Current Low Limit （Peak）	Range:	0.0-999.9 uA
	Resolution:	0.1uA
DISPLAY
Touch Current Display （RMS）	Range 1	0.0uA~ 999.9uA, frequency DC - 1MHz
	Resolution	0.1uA
	Accuracy	DC : ±2% of reading + 3counts 15Hz < f <100KHz : ±2% of reading + 3counts 100KHz < f < 1MHZ : ±5% of reading （10.0uA - 999.9uA）
	Range 2	1000uA~8500uA, frequency DC - 1MHz
	Resolution	1uA
	Accuracy	DC : ±2% of reading + 3counts 15Hz < f <100KHZ : ±2% of reading + 3counts 100KHz < f <1MHZ : ±5% of reading （10uA - 8500uA）
	Range 3	8.00mA~20.00mA, frequency DC - 1MHz
	Resolution	0.01mA
	Accuracy	DC : ±2% of reading + 3counts 15Hz < f < 1MHz : ±5% of reading （0.01mA -20.00mA ）
Touch Current Display （Peak）	Range 1	0.0uA~ 999.9uA, frequency DC - 1MHz
	Resolution	0.1uA
	Accuracy	DC : ±2% of reading +2uA 15Hz < f <1MHZ : ±10% of reading +2uA
	Range 2	1000uA ~ 8500uA, frequency DC - 1MHz
	Resolution	1uA
	Accuracy	DC : ±2% of reading +2counts 15Hz < f <1MHz : ±10% of reading +2counts
	Range 3	8.0mA ~ 30.0mA, frequency DC - 100KHz
	Resolution	0.01mA
	Accuracy	DC : ±2% of reading +2counts 15Hz < f < 100KHz : ±10% of reading +2counts
Measuring Device Module
MD1		IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010
		IEC60990 Fig4 U1, IEC60065
MD2		IEC60990 Fig5 U3, IEC60598-1
		IEC60990 Fig5 U1
MD3		IEC 60601-1
MD4		UL544NP, UL484 , UL923, UL471, UL867, UL697
MD5		UL544P
MD6		UL1563
MD7		IEC60950, IEC61010-1 FigA.2 （2K ohm） for RUN Test MD Circuit.
External MD		Basic measuring element 1k ohm
MD Voltage Limit		70Vdc
Leakage Current Offset	Range:	0 - 999.9uA
	Resolution:	0.1uA
DUT POWER
AC Voltage		0.0-277.0V
AC Current		40Arms max continuous
Over Current Protection		50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec
AC Voltage High/Low Limit	Range:	0.0-277.0V
	Resolution:	0.1V/step
AC Voltage Display	Range:	0.0 - 277.0 V
	Resolution:	0.1 volt / step
	Accuracy:	±（1.5% of reading + 2 counts） , 30.0 - 277.0VAC
Delay time setting	Range:	0.2 !V 999.9 seconds
	Resolution:	0.1 second
Timer display	Range:	0.0 !V 999.9 seconds
	Resolution:	0.1 second
	Accuracy:	± （0.1% of reading + 0.05 seconds）
GENERAL
PLC Remote Control		Input - Test, Reset, Interlock & Recall File 1 through10
		Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out
Scanner Control		It is applied to control Matrix Scanner （Model 7006）
Memory		50 memories , 30steps per each memory . Max. Result Display 900 data （30 memories x 30 steps）
Auto Reverse Function		AUTO Reverse ON / OFF parameter setting selection Automatic Reverse polarity switch for normal condition in one step setting menu. Only display maximum leakage current value.
Scope Output Interface		At rear panel BNC type to connet scope for some IEC standards test requirement and application.
Display		320 X 240 graphic LCD
LCD Contrast Setting		Range: 1-9; 1 is lightest character, 9 is darkest character.
Alarm Volume Setting		Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume.
Security		Lockout capability to avoid unauthorized access to test set-up programs.
Calibration		Software and adjustments are made through front panel, Automatic Calibration alert function to signal operator when calibration is due.
Results Display		All test result information will be displayed on the screen.
Interface		RS232 standard
Safety		Product with TUV/GS certificate
Dimension		430 （W） x 133（H） x 300 （D） mm
Weight		12 Kg
STANDARD ACCESSORIES
Power Cord		X1
Fuses		X2 （Including a spare contained in the fuse holder）
Interlock Disable Key（1505）		X1
TC Receptacle Adaptor Box （1932）		X1
Hipot Test Lead for PH / PL （1101）		X2
RS232 Link Cable 1.5m（1130）		X1
DUT Power Cable 40A（1148）		X1
RUN Module （Opt.752）
W		Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W
A		Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A
PF		0.000 -1.000
Leakage Current		Range : 0.00 - 10.00mA , Resolution : 0.01mA
AC Current High/Low Limit Setting	Range:	0-40A
	Resolution:	0.01A/step
AC Current Display	Range:	0.000 !V 3.500 A / 3.00 - 40.00A
	Resolution:	0.001A / 0.01A
	Accuracy :	± （2 % of reading + 5 counts） / ± （2 % of reading + 2 counts）
AC Power High/Low Limit Setting	Range:	0 - 10KW
	Resolution:	1W
AC Power Display	Range:	0.0 -1000.0W / 1000 - 10000W
	Resolution:	0.5W / 5W
	Accuracy :	±（2 % of reading + 2 counts ）
Power Factor High/Low Limit Setting	Range:	0.000 - 1.000
	Resolution:	0.001
Power Factor Display	Range:	0.000 - 1.000
	Resolution:	0.001
	Accuracy :	± （2 % of reading + 2 counts ）
Leakage Current High/Low Limit Setting	Range:	0.00 - 10.00mA
	Resolution:	0.01mA
Leakage Current Display	Range:	0.00 - 10.00mA
	Resolution:	0.01mA
	Accuracy :	± （2 % of reading + 2 counts ）
Delay Timer Setting	Range:	0, 0.2 - 999.9
	Resolution:	0.1
Dwell Timer Setting	Range:	0, 0.1-999.9 （0=continuous）
	Resolution:	0.1
Timer display	Range:	0.0 - 999.9 seconds
	Resolution:	0.1 second
	Accuracy:	± （0.1% of reading + 0.05 seconds）
Power Control		It is applied to control Transformer Box （1931/1931S） or AC Power Source（6700/6800/6400 Series）
HV & GB Link Module （Opt. 753）
Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A
GPIB Interface Card （Opt. 731）
Printer Port Interface Card （Opt. 732）
Multi-function Interface Card （Opt. 751）
Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability.
High Measurement Range 35mArms / 70mApeak & 4MDs （Opt. 754 ）
35mArms / 70mApeak for IEC60990 fig4（U1 and U2）, IEC60990 fig5（U1 and U3）, UL484, IEC60601 Test Requiremt , Notice : Option this MD circuit have to replace MD module all MD circuits .
Transformer Box （Option） Add this option must optional Opt.752 RUN Module.
1931 Series Transformer Box （500VA/ 1KVA/1.8KVA/3.6KVA）		Multi-Tape of 1.0, 1.06, 1.1 times of input voltage.
1931-S Series Transformer Box （500VA/ 1KVA/1.8KVA/3.6KVA）		Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage.
AC Power Source （Option） Add this option must optional Opt.752 RUN Module.
6800 Series Digital AC Power Source （6805, 6810 , 6820 , 6830 and 6840 ）
6700 Series Programmable AC Power Source （6705, 6710 , 6720 , 6730 and 6740 ）
6400 Series AC Power Source （6402, 6403, 6405, 6410 ）