QQ交谈
您所在位置：> 请输入产品关键字：
邮编：518033
联系人：付先生
电话：0755-83986300/0755-83980158
传真：0755-83980158
手机：13802268624
留言：发送留言
个性化：www.lp-17.com
网址： www.gdojbk.com
商铺： http://www.cylcaiwu.com/st118675/
112AL湿膜梳-112AL湿膜梳│易高Elcometer│112AL冲压铝制湿膜测厚仪
- 发布日期：
- 有效日期：
- 所 在 地：
- 产 地：
- 已获点击：
- 2025年6月12日
- 2025年12月13日
- 广东深圳市
- 易高Elcometer
- 310次
【产品简介】
【详细说明】
如有任何问题请与我司业务专员：
：豪
:fuhao@17Lp.com
英国易高Elcometer 112AL冲压铝制湿膜梳
这些冲压铝制湿膜梳成本低，用于测量湿膜厚度。
由于是用铝材料冲压而成，故精确度不如P.126的高精度测量仪。
每包共有10片湿膜梳，每片上一面为公制量程（25~3000μm），另一面为英制量程（1~118mils）。
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.
Wet film combs have teeth of various lengths on their sides.
Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.
The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value Example In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou. If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement. To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe. On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
| 符合以下标准 | |
| ASTM D 4414-A | BS 3900-C5-7B |
| ISO 2808-7B | NFT 30-125 |
| 型号 | 分类 | 量程 | 零件号 |
| Elcometer 112AL | Elcometer 112AL冲压铝制湿膜梳（x10） | 25~3000μm1~118mils | B112AL12473-3 |
Elcometer 112AL冲压铝制湿膜梳
How to use a Wet film Comb - Elcometer Wet Film Measurement