Vötsch – Thermal Shock Test Cabinet--Model VT 7012 S2

德国-高低温冲击试验箱--型号VT 7012 S2

Performance data性能参数

Temperature range of

hot chamber热箱温度范围                 from +50 °C to +220 °C

Temperature range of

cold chamber冷箱温度范围               from -80 °C to +70 °C

Hot or cold chamber may also be utilized as individual temperature chamber.
热箱或冷箱分别可作为单独温度试验箱使用

Temperature deviation in time

in centre of working space

工作室中心点随时间温度偏差              ±0.3 K to ±1.0 K

Temperature deviation in space

空间温度偏差                                    ±0.5 K to ±2.0 K

Calibration values校准点                   -40 °C cold chamber and +125 °C hot chamber
                                                      冷箱-40 °C和热箱+125 °C

Heating rate of hot chamber

according to IEC 60068-3-5

按照IEC 60068-3-5热箱升温速率 13 K/min.

Cooling rate of cold chamber

according to IEC 60068-3-5

按照IEC 60068-3-5冷箱降温速率 5,3 K/min.

Heating rate of cold chamber

according to IEC 60068-3-5

按照IEC 60068-3-5热箱降温速率 2 K/min.

Temperature changing tests: MIL 883 E, Method 1010.7, Severity D with 12 kg of IC''''s

distributed over 3 shelves; measurement on test speci-mens

温度变化试验：按MIL 883 E, Method 1010.7, Class D，

12 kg的IC’s , 分散于3个样品架，在试验样品上测量   

Adaption time < 15 min.恢复时间小于15分钟

The following standards are met

满足的试验标准     DIN 40 046, page 14, test Na,

transfer time < 10 sec.;

IEC-60068-2-14, test Na,

transfer time < 10 sec.;

MIL-STD-810 E, method 503;

MIL-STD-883 E, method 1010.7

variants A,B,C,D,F

JEDEC standard JESD22-A101-A

Test space dimensions

试验空间尺寸                                  470 mm wide 宽

                                                      650 mm deep 深

                                                      410 mm high 高

Standard features ...主机标准配置

·         Powder coated housing made of galvanised steel sheet

·         粉末喷涂镀锌钢板外壳

·         Window, 355 mm x 355 mm, in the hot chamber

·         热箱配置观察窗355 x 355 mm

·         1 Ultra-lightweight shelf incl. rails1个轻质样品架，包括导轨

·         Cradle in loading position locked吊篮在装载样品位置被锁定

·         Max. loading capacity of cradle 50 kg吊篮zui大负载能力50 kg

·         80 mm leadthrough直径80 mm引线孔

·         volume compensation system for long-term operation

·         *操作使用大容量补气系统

·         water-cooled refrigeration unit水冷却制冷系统

·         CFC-free refrigeration cycle全封闭无氟制冷循环

·         Comfortable Color-Touchpanel彩色触摸式控制器

·         Highly efficient 32 bit control and monitoring system
SIMCON/32 NET /32位高效控制和监测系统SIMCON/32 NET

·         Digital-I/O, potential-free 24 V, 4 freely disposable inputs/outputs

·         数字式I/O，零电势24V，4个可自由选用的输入/输出

·         Independent adjustable temperatur limiter t_min/t_max in cradle

·         吊篮中的独立的、可调节的温度限制器，zui低温度/zui高温度

·         Potential free contact for switching-off of test specimens

·         用于试验样品开关的无电势接触器

·         adjustable software temperature limiter min/max

·         可调节的软件温度限制器，zui低温度/zui高温度

·         Serial interface 接口RS 232

·         Trend display试验状态显示

·         Cycle couter, total no. of cycles / remaining run time

·         循环计数器，总试验循环计数器/剩余运行时间

·         Operating hour counter工作小时计数器

·         European socket欧洲型插座

·         Temperature control using movable sensor in cradle or
alternatively fixed sensor in hot or cold zone

·         温度控制用吊篮中移动传感器或更换冷温箱或热箱中的固定传感器

·         Defrosting cycles automatic and programable自动除霜和程序除霜

·         Dwell time start programable可编程计算停留时间

·         Already programed and may be called up at any time:
MIL 883 E, method 1010.7 Intensity of test A,B,C,D,F

·         随时可以调用已经固化的试验程序，美军标准MIL 883 E, method 1010.7 intensity of test A B,C,D,F

·         Calibration of 2 temperature values2点温度值校正

·         1 Operating instruction操作手册一套

用户的满意是我们服务的宗旨，完善的售后服务使您解除一切后顾之忧，我们坚信一个好的企业卖出去的不仅仅是一台好的产品，更重要的是良好的服务。

Best regards!

广东宏展科技有限公司-西南办事处

Guangdong Hongzhan Technology Co.,Ltd

秦 玉 玲  qin yuling

Phone:135 9430 9859

:cq@oven.cc   www.oven.cc 

：