ZR-ECB-N-01-24DC/10 单通道电子式断路器
参考价 | ¥ 128 |
订货量 | ≥1个 |
- 公司名称 常州零点智能科技有限公司
- 品牌 零点科技
- 型号 ZR-ECB-N-01-24DC/10
- 产地 常州市天宁区中交智慧港产业园14幢9楼
- 厂商性质 生产厂家
- 更新时间 2025/7/15 13:09:23
- 访问次数 15
联系我们时请说明是化工仪器网上看到的信息,谢谢!
产地类别 | 国产 | 外形尺寸 | 6*90*72mm |
---|---|---|---|
重量 | 0.032kg | 脱扣类型 | 电子式 |
额定电压 | 24V | 按键设定额定电流 | 1/2/3/4/5/6/7/8/9/10A |
1. 适用范围 Application Scope
l - 24V DC 开关电源输出侧
l - 24V DC 电流分配
l - PLC、电磁阀、传感器、执行器等负载保护
2. 主要技术参数Main Technical Parameter
产品特征 Product Characteristics
安装类型 Mounting Type | 标准DIN35mm导轨安装,1位 Standard DIN35mm rail mounting, 1 position |
产品类型 Product Type | 设备(过流)断路器 Equipment (overcurrent) circuit breaker |
?;ねǖ?/span> Protection Channel | 1 |
绝缘防护等级 Insulation Protection Level | III |
污染等级 Pollution Degree | 2 |
宽度 Width | 6mm |
高度 Height | 90mm |
深度 Depth | 72mm (包含DIN7.5mm类型导轨) 72mm (Including DIN7.5mm type rail) |
材料规格 Material Specification
外壳 Enclosure | PA66 |
导电件 Conductive Parts | C5191 |
环保标准 Environmental Standards | 符合RoHS2.0指令要求 Compliant with RoHS 2.0 directive requirements |
阻燃等级 Flame Retardant Rating | 符合UL94 V-0标准 Compliant with UL94 V-0 standard |
电气特征 Electrical Characteristics
工作电压范围 DC Input Operating Voltage Range DC Input | 18VDC---30VDC |
额定工作电压 Un Rated Operating Voltage Un | 24VDC |
总额定电流 I max Total Rated Current I Max | Max. 10ADC(DC IN) |
单通道额定电流 In Single Channel Rated Current In | 小于10A Less then 10A |
预设电流 Is Preset Current Is | 10A |
额定电涌电压 Vm Rated Surge Voltage Vm | 0.5 KV |
脱扣类型 Plug Type | E(电子式) E (Electronic) |
产品功耗 W Product Power Consumption W | 静态小于0.5W Standby power less than 0.5W |
??槌跏蓟奔?/span> ms Module Initialization Time ms | 上电时间小于50ms Power-on time less than 50ms |
关断后冷却时间 S Cooling Time After Shutdown s | 小于30S Less than 30S |
电流测量误差 @I Current Measurement Error @I | 小于10% Less than 10% |
MTBF (IEC61709,SN29500) | 产品寿命 600Kh Product life 600Kh |
操作与状态指示 Operation & Status Indication
按键设定额定电流(10档,在关状态有效) Button Setting Rated Current (10 levels, effective in off state) | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10A |
按键操作开关 Button Operation Switch | 各通道在LED常亮状态 Each channel in LED steady state |
LED 绿色 LED Green | 通道在开状态 Channel in open state |
LED 红色 LED Red | 通道在关状态 Channel in closed state |
LED 绿色,闪烁 LED Green, Flashing | 电流达到预警值 Current reaches warning value |
LED 黄色,闪烁 LED Yellow, Flashing | 电流达到过载值,8秒后关断通道 When the current reaches the overload value, the channel will shut off after 8 seconds. |
LED 红色,闪烁 LED Red, Flashing | 过载后关断冷却,持续30秒,此状态操作无效 After overload, shutdown cooling for 30 seconds, this state operation invalid |
外部连接信息 Communication with Device and Controller (如:PLC)
主电源输入 Main Power Supply Input | 如DC 24V+ Such as DC 24V+ |
主回路地 Main Circuit Ground | GND |
单路控制输出 Single Channel Control Output | DC(+)端接设备输入,各路相同 DC (+) terminal connected to device input, same for each channel |
单路共地 Single Channel Common Ground | DC(-)接地端与设备共地相连 DC (-) ground terminal connected to common ground of devices |
继电器干结点输出 Relay Dry Contact Output | 常闭,所有通道开启时断开,用于控制输入信号 Normally closed, opens when all channels are activated, used for controlling input signals |
RS485 通讯线 RS485 Communication Line | 从机端,连接主控制器(如PLC) Slave end, connected to main controller (such as PLC) |
认证与测试 Certification & Testing
防护等级 Protection Grade | IP20 |
环境温度(工作、储存) Ambient Temperature (Operating, Storage) | -25---70℃ ; -40---85℃ |
海拔 Altitude | ≤ 2000m 正常使用;2000-4000m 降额使用 ≤ 2000m normal use; 2000-4000m derated use |
湿度测试 Humidity Test | 240h, 95% RH, 40℃ |
盐雾测试 Salt Spray Test | 零件满足72小时,整机满足48小时 Components meet 72 hours, whole machine meets 48 hours |
冲击(工作) Shock (Operational) | 30g(IEC60068-2-27,Test Ea) |
振动(工作) Vibration (Operational) | 5Hz…24.9Hz(IEC60068-2-6,Test Fc) 24.9Hz…150Hz(IEC60068-2-6) |