多層SU-8模具

這個定制的SU-8主模具非常適合實驗室生產的微流控芯片。一個經濟有效的工具，用于軟鑄聚合物（如PDMS）以及熱壓成型工藝（CoC、PMMA、FlexDYM…）。

可在硅襯底上以高寬高比圖案化多達4個SU-8層：

微觀結構布局

微觀結構布局應由客戶以適當?shù)奈募袷剑?cif、.dwg、.dxf）提供，或由我們的合作伙伴根據正確的格式進行調整。版圖修改后，在制造之前，將向客戶提供一份pdf文件，以供設計終批準。微觀結構設計應考慮的主要方面：

文件格式：CIF、DWG或DXF文件。其他格式如DXF也可以接受。所有的結構都應該有閉合的輪廓。對所提供文件的任何修改都將收取額外費用。

有效面積：布局必須固定在直徑為90mm的晶圓上。

切割：切割線應該畫出來以備需要。

多層模具：應為不同的層提供對齊標記

Multi-layer SU-8 mold多層SU-8模具

Multi-layer SU-8 mold
This custom SU-8 master mold is perfect for your lab production of microfluidic chips. A cost-effective and useful tool for soft casting polymers (like PDMS) as well as hot-embossing processes (COC, PMMA, flexdym...).

Up to 4 SU-8 layers can be patterned with high aspect ratio on silicon substrates:

Microstructure layout
Microstructure layout should be provided by customers in an appropriate file format (.CIF, .DWG, .DXF) or they can be adapted to a correct format by our partner. After the revision of the layout, previously to the manufacturing, a PDF file will be provided to customer for the final approval of the design. The main aspects to be considered in the design of the microstructures:

File format: CIF, DWG or DXF files. Other formats as DXF may be accepted. All the structures should have closed contours. Any adaptation of the provided file will bring an extra charge.
Effective area: Layout must be fixed on 90 mm diameter of the wafer.
Dicing: The cutting lines should be drawn in case they are needed.
Multi-layer Molds: Alignment marks should be provided for the different layers

Multi-layer SU-8 mold多層SU-8模具