现货 118-09A/B119-44  耐溶剂导电油墨

说明：118-09A/B119-44是一种双组分、耐溶剂、导电油墨、涂料和

适用于丝网印刷线路的粘合剂。本产品对卡普顿、聚酯薄膜、玻璃、塑料、聚碳酸酯和其他多种基材。与传统的导电材料不同，这种产品

抗甲乙酮。它也非?？构紊撕驼酆邸?18的一些应用-

09A/B119-44包括但不限于聚酰亚胺挠性电路、聚合物厚膜电路的EMI/RFI屏蔽，

薄膜开关，表面安装设备的电气附件，喷镀氧化铟锡的母线

钽电容器的表面和阳极涂层。本产品专为与CMI交叉使用而设计

产品116-20，紫外固化电介质。

配合比（按重量计）：A部分B119-44

100 1.5分

适用期：4天。

混合说明：在加入固化剂之前，在原容器中预混料118-09 A部分。增加B119-44

搅拌均匀。此时，可通过添加少量CMI 113-12稀释剂来稀释材料。

典型固化特性：

稠度光滑膏

填充银

银含量（固化）>85

抗皱性佳

体积电阻（欧姆厘米）0.00005

片材电阻率（ohm/sq./mil）0.019

可焊性编号

水解稳定性优异

有效温度范围（摄氏度）-55至200

热稳定性（摄氏度）达到200

固化计划：

80°C 4小时

100°C 1小时

125°C，20分钟。

储存：25°C下，未开封、未混合的容器中保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免长时间

接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。注：这并不罕见

使B部分结晶。在水浴中加热至40-45°C，使材料恢复原状

粘度。结晶不会以任何方式影响产品的性能。

现货 118-09A/B119-44  耐溶剂导电油墨

118-09A/B119-44
SOLVENT-RESISTANT ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 118-09A/B119-44 is a two component, solvent-resistant, electrically conductive ink, coating and
adhesive suitable for screen-printing circuit lines. This product features excellent adhesion to Kapton, Mylar, glass,
polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very
resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 118-
09A/B119-44 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry,
membrane switches, electrical attachments for surface mounted devices, bus bars on Indium Tin Oxide sputtered
surfaces, and anode coatings for tantalum capacitors. This product is designed for use in crossovers with CMI
product 116-20, a UV curable dielectric.
MIX RATIO (by weight): Part A B119-44
100 1.5
Pot Life: 4 days.
MIXING INSTRUCTIONS: Premix 118-09 Part A, in original container prior to adding curing agent. Add B119-44
and mix until uniform. At this point the material may be thinned by adding small amounts of CMI 113-12 thinner.
TYPICAL CURED PROPERTIES:
Consistency Smooth Paste
Filler Silver
Percent Silver (cured) > 85
Crease Resistance Excellent
Volume Resistance (ohm-cm) 0.00005
Sheet Resistivity (ohm/sq./mil) 0.019
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 200
Thermal Stability (°C) Good to 200
CURE SCHEDULE:
80°C 4 Hours
100°C 1 Hour
125°C 20 Min.
STORAGE: Shelf life: 12 months at 25°C, in unopened, unmixed containers.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin. Note: It is not unusual
for crystallization of the Part B to occur. Warm to 40-45°C in a water bath to return the material to it's original
viscosity. The crystallization does not affect the performance of the product in any way.