PurgEye 300 Nano便携式测氧仪特征:
Small, Lightweight and Inexpensive
The Argweld PurgEye® 300 Nano Weld Purge Monitor® is small, lightweight and inexpensive.
The PurgEye® 300 Nano is equipped with an integrally mounted sensor to eliminate electrical interference.
The PurgEye® 300 Nano is specifically developed for weld purging of critical stainless steel and titanium joints and others where data logging, alarms and welder control are not necessarily required.
The PurgEye® 300 Nano is perfect for operation with manual welding, orbital welders, welding enclosures, pipe welding, chamber welding, duplex steel and titanium welding and ideal for welding stainless steel in ultra clean applications.
The PurgEye® 300 Nano has secure 'leak tight' connectors for weld purge hoses. Also, the instrument can be used with optional accessory hand pump and gas sampling probe.
The PurgEye® 300 Nano has low repair, refurbishment and re-calibration costs. There is no pump needed and hence there are no moving parts to fail.
PurgEye 300 Nano便携式测氧仪总体描述:
Purpose-designed Purge Monitor
The Argweld® PurgEye® 300 'Nano' Weld Purge Monitor® has been specifically designed as a very low cost, basic entry level version of the Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld purging down to 10 ppm.
With a large alpha-numeric display, the Argweld® PurgEye® 300 'Nano' measures very accuray from 1000 ppm down to 10 ppm.
The Argweld® PurgEye® 300 'Nano' uses a unique new low cost long life sensor which has very little maintenance requirement and avoids the disadvantages of monitors with 'wet cell' technology that have to be constantly calibrated and have sensors replaced.
Argweld® PurgEye® 300 'Nano' Weld Purge Monitors® are available for immediate delivery.
技术参数:
Argweld® PurgEye® 300 Nano Weld Purge Monitor® Accuracy Range
Measuring Range: | 1,000 ppm down to 10 ppm |
Accuracy: | ±2.0% of scale reading |
Size: | 145 x 190 x 70 mm |
Power Consumption: | 18 W |
Operating Voltage: | AC 115/230 V single phase 50/60 Hz |
Weight: | 1.5 kg |
The PurgEye® 300 Nano has an operating voltage of AC 115/230 V single phase 50/60Hz. The unit uses an external 12 V Power Supply Unit with an input voltage range of AC 90 to 260 V (included).
The PurgEye® 300 Nano has a large alpha-numeric display.
Display readings can only be shown in ppm.
The PurgEye® 300 Nano has a warm up time of less than 60 seconds.
Supplied with:
External 12 V Power Supply Unit (including multiple international mains adaptor connections)
Sample tube set (40 cm red tubing and 1 metre green tubing)
User instruction booklet
Storage and presentation case
Calibration Certificate for the purpose of Quality Control Procedures and Management Systems
便携式测氧仪/船舶工业氧气分析仪/氧气含量检测仪PurgEye 300 Nano/APIO 300N使用说明:
接通电源插头即为开机。
待显示器中显示为1000并闪烁时(大约10分钟左右),表示机器已经热机完成,可以使用。
分别把探针头及排气管插入机器的2个孔中。(上下孔没有规定顺序)。
把探针头插入带检测管道的焊缝中即可检测。
电源插头拔掉即为关机。
便携式测氧仪/船舶工业氧气分析仪/氧气含量检测仪PurgEye 300 Nano/APIO 300N其他规格:
Shipping Information, Weights and Dimensions
Product Codes and Sizes
Dimensions 145 x 190 x 70 mm
Gross weight 2.0 kg
Nett weight 1.5 kg
Volumetric weight 2.1 kg
Actual Instrument dimensions 145 x 190 x 70 mm
Actual Instrument weight 1.5 kg
Storage carry case dimensions 377 x 322 x 95 mm
更多PurgEye 300 Nano/APIO 300N讯息请。
相关分类
- 烟气分析仪
- 甲醛分析仪
- 粉尘测定仪/粉尘仪
- 红外线气体分析仪
- 多组分气体分析仪
- 一氧化碳分析仪
- 二氧化碳分析仪
- 氨气分析仪/氨分析仪
- 汽车尾气分析仪
- 有毒有害气体监测仪
- 臭氧检测仪
- 烟气/大气重金属在线分析仪
- 高纯气/特气分析系统
- VOC检测仪/TVOC检测仪
- 臭氧分析仪(O3)
- 热导式气体分析仪
- CO、SO2、HCL、NOX、空气检测仪
- PM2.5/PM10/PM1/TSP大气颗粒物监测仪
- 甲烷/非甲烷烃检测仪
- 氮氧化物分析仪(NOX)
- 油烟检测仪
- 恶臭测定仪
- 粉尘采样器
- 气体采样器/大气采样器
- 粒子计数器
- 烟尘采样器、烟气采样器
- 颗粒物采样器
- 零气发生器
- TSP采样器
- 空气微生物采样器
- PM2.5采样器
- PM10采样器
- 粗、细颗粒物双道采样器
- 二噁英采样仪/二噁英采样器
- 酸雨采样器
- 激光雷达
- 太阳光度计
- 尘量分析仪
- 气体稀释仪
- 烟度计
- 气溶胶
- 气体在线自动监测系统
- 灰霾监测系统
- 空气质量自动监测系统
- 烟气汞连续监测系统
- 气体报警器/探测器/传感器
- 环境污染事故应急监测仪器
- 温室气体监测仪
- 苏玛罐采样器
- 扬尘监测仪
- 降水/降尘自动采样监测仪
- 烟气汞采样器
- 氨逃逸在线监测系统
- 粒径谱仪